Directed Electronics Ready Remote manual 0 6 D i r e c t e d E l e c t r o n i c s

wire color according to the web information. With your black test probe lead still in the kick panel, probe the suspected wire with the red lead of your test probe. With the brake pedal at rest the LED tester should be extinguished. While watching the test probe, depress the brake pedal. The LED tester should illumi- nate Red. Once you have located the correct brake wire, solder the small BROWN (H1/3) wire of the main harness to it and wrap the connection with electrical tape.

warning! Do not use the vehicle until you confirm the operation of the brake shut- down.

Installing the hood pin switch requires drilling a ¼-inch hole in the metal lip under the hood. Choose a location that will allow the pin switch to be depressed when the hood is closed. The pin switch has a spade connector on the bottom for the wire connection.

© 2 0 0 6 D i r e c t e d E l e c t r o n i c s 21