Martin Audio AQ Series 6. Installing with AQ Series brackets

AQFB

Flying Bracket – allows AQ8, AQ10, AQ12 to be flown at a choice of vertical angles depending on

which pair of pick-up holes are used

6. Installing with AQ Series brackets

Consult a qualified structural engineer with a full knowledge of the building, its load ratings

and your intended loudspeaker installation plans before commencing any installation.

All AQ Series wall and ceiling brackets are mounted and adjusted in a similar manner. The

brackets are designed for 1st & 2nd fit installation.

1st fit: Wall bracket or ceiling bracket

2nd fit: Speaker bracket if the system is to be wall mounted or ceiling mounted on an AQCB6

–or-

Speaker bracket/tube assembly if the system is to be ceiling mounted using AQCS or

AQCL.

Important note:

To avoid excessive leverage, ceiling brackets should never be used for wall mounting!

1st Fit the fixed wall or ceiling bracket before loudspeakers are brought to site. Cables

(not shown) may be pulled and terminated at this stage. Loudspeaker/bracket/tube

assemblies may be fitted later.

Wall bracket Ceiling bracket

2nd Fit the loudspeaker brackets to the loudspeakers (not shown).

If the loudspeakers are to be ceiling mounted, attach the tube to the

loudspeaker/bracket assembly. Vertical loudspeaker angles may be preset at this

stage if required.