Martin Audio AQ Series 13. DX1 Speaker Management System

3) Replace the top pcb making sure that it is properly latched onto all four pillars

4) Replace the AQX lid making sure all four screws are in place and properly tightened.

Notes:

The above table includes limiter settings for systems driven via 70V & 100V line transformers.

See Section 15 for typical loudspeaker wiring schemes.

13. DX1 Speaker Management System

For convenience, the general use DX1 Speaker Management System is supplied ready-loaded

with presets for all common AQ Series configurations starting at preset position 75.

These presets will also be included as binary files on the new Martin Audio User Guides CD (May

2005 or later). They may be transferred to Martin Audio DX1 or XTA DP226 controllers via a 9-pin

serial cable from a pc running Microsoft Windows™ - simple click through the following links:

then…

and follow the instructions.