CONTENTS | < | > | |
| GUIDES |
2 APPROVALS
This equipment conforms to the requirements of the EMC directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC and the requirements of the Low Voltage Directive 73/23/EEC, amended by 93/68/EEC.
Standard Applied | EMC Emission | |
| EMC Immunity | |
| Electrical Safety | EN60065, Class I |
3 WARNINGS
ENGLISH
3.1Explanation of graphical symbols
The lightning symbol within a triangle is 
intended to alert the user to the presence of
lethal voltages within the amplifier that are of sufficient magnitude to constitute a risk of electric shock to humans.
3.2WARNING
To reduce risk of fire or electric shock, do not expose this apparatus to rain or moisture.
3.4Important Safety Instructions
! The exclamation mark within a triangle is 
intended to alert the user to the presence of
important operating and service instructions in the literature accompanying the product.
3.3CAUTION
To reduce the risk of fire or electric shock, do not remove screws. There are no
Before using your amplifier, please read the operating instructions and the safety suggestions
1.Keep this manual for future reference.
2.Do not operate the amplifier if liquid ingress is suspected.
3.Do not stand water or any other liquid on, or near the amplifier.
4.Do not use this amplifier near water. Do not operate the amplifier if wet or standing in liquid.
5.Clean only with dry cloth.
!6. Do not block the air intake or exhaust ports. Always install the unit in accordance with the instructions.
7.Do not operate the amplifier on or near any source of heat, such as radiators, lighting dimmer racks, or other apparatus that produce heat.
8.Always operate the amplifier with the chassis ground wire connected to the electrical safety earth. Do not tamper with the purpose of the electrical safety earth, it is provided for your safety. A grounding type plug is fitted; this has two pins and a third grounding prong. If the plug provided does not fit your mains outlet, consult an electrician or a competent person to replace the fitted plug. See page 10 section 6.3 for wiring colour code
9.Connect only to AC power outlets rated 230 - 240V (or 100 - 120 V),
10.Do not use this amplifier if the mains cable is damaged or frayed, particularly check where the mains cable exits the amplifier and the mains plug. Protect the mains cable from being walked upon or rolled over by heavy objects.
11.Only use accessories specified by the manufacturer.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
2
Martin Audio – MA1.3s Amplifier
