W3P

Compact three-way trapezoid system

technical specifications

architectural and engineering specifications

touring and

TYPE

Compact three-way trapezoid

FREQUENCY RESPONSE (5)

55Hz-18kHz ± 3dB

 

-10dB @ 45Hz

 

 

DRIVERS

15" (380mm) / 3" (75mm) voice coil

 

6.5" (165mm) horn loaded mid-range

 

1" (25mm) exit HF compression driver

RATED POWER (2)

400W AES, 1600W peak

RECOMMENDED AMPLIFIER 400-550W into 4 ohms

SENSITIVITY (6)

100dB

MAXIMUM SPL (7)

125dB continuous, 131dB peak

NOMINAL IMPEDANCE

8 ohms

DISPERSION (-6dB)

65º horizontal, 40º vertical

CROSSOVER

650Hz, 3.3kHz passive

FINISH

Textured grey paint

PROTECTIVE GRILLE

Grey perforated steel

CONNECTORS

2 x Neutrik NL4

FITTINGS

8 x M8

 

1 x mounting pole socket

 

2 x MAN blanking plates

 

2 x rear kelp fittings

 

 

DIMENSIONS

(W) 435mm x (H) 708mm x (D) 425mm

 

(W) 17.1ins x (H) 27.9ins x (D) 16.7ins

WEIGHT

34.5kg (75.9lbs)

accessories

HTKWT3Y

Flying yoke

HTKCT05

8mm Shouldered eye bolt

GPT060

Fitted enclosure flying points

HTKLIS

Lightweight install stud

The loudspeaker system shall be of the three-way type consisting of one 15" (380mm) direct radiating reflex loaded low frequency transducer, one 6.5" (165mm) cone driver mounted on a constant directivity horn flare with integral toroidal waveguide and one 1" (25mm) exit HF compression driver mounted on a constant directivity horn in a trapezoidal plywood enclosure. The enclosure shall be fitted with an integral pole mounting socket and threaded inserts for wall and ceiling mounting. Low and mid frequency sections shall be integrated by an internal 650Hz passive crossover network and mid and high frequency sections shall be integrated by an internal 3.3kHz passive crossover network.

Performance of the loudspeaker system with its electronic controller shall meet or exceed the following criteria:

Frequency response measured 1 metre on axis shall be 55Hz-18kHz ±3dB.

High frequency dispersion at -6dB points shall be 65˚H x 40˚V.

Power handling shall be 400W AES, 1600W peak. Rated impedance shall be 8 ohms.

Maximum SPL measured at 1 metre on axis shall be 125dB continuous, 131dB peak.

Dimensions (W) 435mm x (H) 708mm x (D) 425mm (17.1ins x 27.9ins x 16.7ins).

Weight 34.5kg (75.9lbs).

theatre

N o t e s

(1)Measured on-axis in half space at 2 metres, then referred to 1 metre.

(2)AES Standard ANSI S4.26-1984.

(3)Measured in half space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.

(4)Measured in half space at 2 metres using band limited pink noise, then referred to 1 metre.

(5)Measured on-axis in open (4π) space at 2 metres, then referred to 1 metre.

(6)Measured in open (4π) space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.

(7)Measured in open (4π) space at 2 metres using band limited pink noise, then referred to 1 metre.

Tr a d e D e s c r i p t i o n s A c t

Due to Martin Audio’s policy of continuing improvement, we reserve the right to alter these specifications without prior notice. Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards and rigorously tested to ensure that it meets the performance criteria specified in the design.

The loudspeaker system shall be the Martin Audio W3P.

Century Point, Halifax Road, Cressex Business Park,

High Wycombe, Buckinghamshire HP12 3SL, England.

Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669

E-mail: info@martin-audio.com

All information is Copyright © 2006 Martin Audio Ltd.

5 of 5

www.martin-audio.com

Page 5
Image 5
Martin Audio WW33PP manual Touring, Theatre, Technical specifications, Accessories