MartinLogan 300 Introduction & Installation in Brief, Unpacking, Placement, Signal Connection

Introduction & Installation in Brief

Introduction

Congratulations! You have invested in one of the world's premier subwoofers.

The MartinLogan Dynamo 300 represents the extension of an intensive, dedicated team research program direct- ed toward establishing a world class line of reference subwoofers using leading-edge technology, without com- promising durability, reliability, craftsmanship or aesthetics.

The Dynamo 300 subwoofer uses an 8-inch high-excur- sion driver to achieve deep, tight, well-defined bass. A proprietary amplifier is used to drive the output stage with precision and extremely high efficiency. Low-pass filtering and phase control have been designed to make integrat- ing the Dynamo 300 subwoofer with MartinLogan and non-MartinLogan products both seamless and simple.

The materials in your new Dynamo 300 subwoofer are of the highest quality and will provide years of enduring enjoyment and deepening respect. The cabinet is con- structed from the finest composite material for acoustical integrity and is finished with an attractive custom coating.

This User's Manual will explain in detail the operation of your Dynamo 300 subwoofer and the philosophy applied to its design. A clear understanding will insure that you obtain maximum performance and pleasure from this most exacting subwoofer.

Installation in Brief

We know that you are eager to hear your new Dynamo 300 subwoofer, so this section is provided to allow fast and easy set up. Once you have it operational, please take the time to read, in depth, the rest of the informa- tion in this manual. It will give you perspective on how to attain the greatest possible performance from this most exacting subwoofer system.

If you experience any difficulties in setup or operation of the Dynamo 300, please refer to the Placement, Room Acoustics and Connections and Control Settings sections.

Should you encounter a persistent problem that cannot be resolved, please contact your authorized MartinLogan dealer. They will provide you with the appropriate technical analysis to alleviate the situation.

Step 1: Unpacking

Remove your new subwoofer from its packing.

Step 2: Placement

Ideally, place the Dynamo 300 in a corner near the front of the room. This is a good place to start. Please see the Placement section (page 9) of this manual for more details.

Step 3: Signal Connection

Use the best cables you can. High quality cables, available from your specialty dealer, are recommended and will give you superior performance.

Attach your preamplifier/processor outputs through cables to the signal input area located on the Dynamo 300’s rear panel. Please see the Connections and Control Settings section (pages 6–8) of this manual for more details.

Step 4: Power Connection (AC) (see warning) Make sure the level knob is set at 'Min'. Plug the Dynamo 300 subwoofer into a wall outlet. Review the AC Power Connection section (page 8) of this manual for more details.

Step 5: Setting the Controls

Set the level knob to a medium volume position (12 o'clock). Set the power switch to ‘Auto'.

Step 6: Listen and Enjoy

Now, you may adjust your system and enjoy!

4Introduction & Installation in Brief