Figure 5.

5Move the wall bracket back into position over the wall anchor and place #12 metal washer on one of the screws and drive it through the slot at the bottom-back of the bracket into the mounting anchor. Do not tighten (see figure 5).

6Use a level to assure that the wall bracket is perfectly vertical, then securely tighten the screw at the bottom of the wall anchor. Next, securely tighten the screw at the top of the wall bracket (see figure 5).

Figure 6.

WARNING! When pivoting the Script into place in step 7, be careful so as not to damage the top of the Script cabinet.

7Check to make sure that a 1-1/2inch rubber spacer is on the threaded stud on the bottom of the speaker. Pick up the speaker and carefully angle the bottom of the Script into the bracket by inserting the projecting threaded stud on the bottom of the speaker cabinet through the slot in the bottom support of the wall bracket (see figure 6).

8Mounting the Script