Using Only One Power Supply | Break-In |
You may have noticed a connection on the back of your Stage labeled ‘Power Out’. The use of this connec- tion will allow you to daisy-chain up to five low-voltage MartinLogan products and eliminate the need for multiple low-voltage power supplies.
A variety of low voltage interconnect cables may be pur- chased at your local MartinLogan dealer. Please ask them about options to fit your specific needs.
To use this connection option choose a primary speaker (whichever speaker is most convenient) and connect it as instructed in the ‘Low-Voltage Power Connection’ section on the previous page. To attach additional speakers, run a low-voltage interconnect cable from the ‘Power Out’ to the next speaker’s ‘Power In’ (see figure 2). Cable not included.
When you first begin to play your Stage speaker, it will sound a bit bass shy. This is due to the high-quality, long- life components used in our woofer. Our custom made, butyl surround woofer requires at least 80 hours of break-in at 90 dB (moderate listening levels) before any critical listening. The break-in requirements of the cross- over components (and, to a lesser degree, the electrostatic transducer) are equal.
Figure 2. Connecting power to multiple speakers using one power supply.
8Connections