STORAGE COMPARTMENT SHELVING
Loading Tips and Suggestions
Your product is equipped with a cantilever shelf system to pro- vide you with maximum adjustability and customization options through the purchase of aftermarket shelving.
The basic cabinet comes with 3 glass shelves which can be positioned anywhere in the cabinet. The glass half shelf allows storage of tall bottles or opened wine bottles on the shelf below.
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove a loaded shelf from the unit. Grasp the shelf front with both hands, rotate the front upward and lift out. (See Figure 16). To install a shelf insert the shelf in the unit and insert the hooks into the shelf support slots and drop the shelf down so the hooks drop over the bottom of the slots.
(See Figure 15). The fixed wooden bottle cradle at the bottom of the cabinet will hold 6 bottles of wine. The wooden, bottom bot- tle cradle may be removed for storing “jug” wines. Just remove the two (2) screws that secure the cradle to the cabinet floor.
The bottles or cans on the top shelf directly under the light will be exposed to a slightly higher temperature when the light is on. Position your product accordingly and REMEMBER TO TURN OFF THE LIGHT WHEN IT IS NO LONGER NEEDED.
Tall bottle storage area
Glass
shelves 
Wine bottle cradle
NOTE
Installed shelf tang
Rear tang (hook) on shelf
Make sure the shelf is secure before loading the shelf.
Shelf support slot
Figure 15
Grasp the shelf on the wood front
12
Figure 16
