Marvel Industries 30WCM manual Appliance Features

APPLIANCE FEATURES

Insert Wine Bottles

The five pull-out shelves each hold four bottles. See Figure 4 for typical wine bottle spacing. Tall bottles should not be loaded on the bottom rack because they may prevent the door from closing. Also, there is a fixed, wooden, bottle cradle in the bottom, step section of the cabinet. Three bottles may be stored there.

Loading Tips and Suggestions

Bottom rack(s) may be removed for storing “jug” wines. You may store magnums and other large bottles on any of the racks (except for the top rack) by removing the rack directly above them. Position white wines on the middle or lower racks and red wines on the upper racks (see Figure 5).

The bottles on the top rack directly under the light will be exposed to a slightly higher temperature when the light is on. Position your wines accordingly and REMEMBER TO TURN OFF THE LIGHT WHEN IT IS NO LONGER NEEDED.

Keep wines that you plan to use for everyday drinking and entertaining on the front half of the racks where labels are completely visible. Place wines for aging or longer term storing in the rear.

Pull-out Racks

The five pull-out wine racks may be pulled out ap- proximately seven inches to facilitate adding or removing bottles. DO NOT lean on or press down heavily on the wine shelves. Doing so may damage the shelves and the wine bottles stored on them. Pull the wine racks out gently and carefully to minimize unsettling your wine collection. AVOID pulling out more than one rack at any time to maintain stability.

Single Bottle Racks

Since bottles are not stacked on top of each other, you can easily view and access your inventory without disturbing other bottles (see Figure 6).

Front Bottles (Necks Facing Rear)

Rear Bottles (Necks Facing Front)

Figure 4

Figure 5

Figure 6

5