Inspection
Remove Packaging
Your beverage center has been packed for shipment with all parts that could be damaged by movement securely fastened. Before using, be sure all packing materials and tape have been removed.
Important
Keep your carton packaging until your beverage center has been thoroughly inspected and found to be in good condition. If there is damage, the packaging will be needed as proof of damage in transit.
Note to Customer
This merchandise was carefully packed and thoroughly inspected before leaving our plant. Responsibility for its safe delivery was assumed by the carrier upon accept- ance of the shipment. As directed on the side of your packing carton, claims for loss or damage sustained in transit must be made on the carrier as follows:
Exterior Damage
Make thorough damage notation on your delivery receipt and have driver acknowledge by signature and date. Send a written request asking for an inspection report from carrier. Include the name of carrier representative and the date the inspection was requested. Retain inspection report and receipt for filing of a claim.
Concealed Damage
This must be reported to the carrier within fifteen days. Obtain inspection report from the carrier. Retain the inspection report for filing the claim. DO NOT RETURN DAMAGED MERCHANDISE TO MANUFACTURER - FILE THE CLAIM WITH THE CARRIER.
How to Install Your Refrigerated Beverage Center
Select Location: The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out of direct sunlight and away from heat sources. Best performance will be main- tained when installed within the following parameters:
Ideal Ambient Temperature Range
| 65° – 80°F |
| 65° – 90°F |
Cabinet Clearance: Ventilation is required from the bottom front section of the unit. Keep this area open and clear of any obstructions.
Electrical Connection: Use nominal 115 volt, 60 cycle AC only. DO NOT USE AN EXTENSION CORD
Power Supply Cord with
Grounding Type
Wall Receptacle
Figure 11
