Marvel Industries 3SBAR manual Before Calling for Service, Problem Causes/Solutions

Roll-out Shelves: The roll-out shelves may be pulled out approximately 14 inches to facilitate product loading and retrieval. Do not lean on or press down heavily on the shelves, doing so may damage the shelves or their content. Pull out shelves gently to minimize any possible item shifting. To maintain stability, avoid pulling out more than one shelf at any time.

The roll-out shelves are equipped with a removable center section that allows you to customize the stor- age capability of your refrigerator. Your unit is shipped with three glass shelves and one wine rack, but for added versatility, additional center sections are avail- able. You may purchase an optional open bottle cradle that allows storage of opened wine or champagne bot- tles. Please contact dealer or see Marvel’s website at www.marvelindustries.com for ordering.

Single Bottle Racks: Because bottles are not stacked on top of each other, you can easily view and access your inventory without disturbing other bottles.

Before Calling for Service

Before calling for service, check the trouble shooting table on this page. This table lists possible problems that you can remedy without difficulty to avoid an unnec- essary service call.

If you do need service, contact your dealer or the manu- facturer. In any correspondence, refer to the model number and serial number of your unit which is located on the lower front cabinet flange. Retain you proof of purchase. You may want to record these numbers in the space provided on this page. Follow the procedure out- lined on page 5.

	Possible
Problem	Causes/Solutions
Odor in cabinet	•Interior needs cleaning
Noisy operation	•Cabinet not level
	•Weak floor
Cabinet vibrates	•Cabinet not level
	•Weak floor
Cabinet light not working	•Tube burned out
	•No power at outlet
Appliance will not run	•Temperature control turned
	to “OFF”
	•Line cord not plugged in
	•No power at electrical outlet
	•House fuse blown
Appliance runs too long	•Prolonged door openings
	•Control set too cold
	•Condenser needs cleaning
Moisture collects inside	•Too many door openings
	•Prolonged door openings
	•Hot, humid weather
	increases condensation
Moisture collects on outside	•Hot, humid weather
surface	increases condensation. As
	humidity decreases,
	moisture will disappear.
	•Control improperly set.
Interior too hot/too cold	•Control improperly set
	•Faulty thermometer
	•Relocate thermometer to
	center of cabinet and
	recheck

4