Marvel Industries manual 3SWCCE CHAMPAGNE CELLAR FEATURES

	3SWCCE CHAMPAGNE CELLAR FEATURES
Insert Champagne Bottles	Front Bottles (Necks Facing Rear)
The five (5) roll-out shelves each hold three (3) bottles. See	Rear Bottles (Necks Facing Front)
Figure 4 for typical wine bottle spacing. Tall bottles should
not be loaded on the bottom rack because they may pre-
vent the door from closing.
Loading Tips and Suggestions
Keep champagne that you plan to use for everyday drink-
ing and entertaining on the front half of the racks where
labels are completely visible. Place bottles for longer term	Figure 4
storage in the rear (see Figure 5).
Roll-out Racks
The five (5) roll-out wine racks may be pulled out approxi-
mately fourteen (14) inches to facilitate adding or remov-
ing bottles. Do NOT lean on or press down heavily on the
shelves. Doing so may damage the shelves and the cham-
pagne bottles stored on them. Pull the racks out gently and
carefully to minimize unsettling your champagne collection.
AVOID pulling out more than one (1) rack at any time to
maintain stability.
Single Bottle Racks
Since bottles are not stacked on top of each other, you can
easily view and access your inventory without disturbing
other bottles (see Figure 6).
	Figure 5

Figure 6

4