Marvel Industries 6SBAR manual How to Clean Maintain Your beverage center, Appliance Features

How to Clean and

Maintain Your beverage center

Condenser: The condenser tubing inside the cabinet does not require frequent cleaning; however, satis- factory cooling depends on adequate ventilation over the coils. Be sure that nothing obstructs the required air flow openings in front of the cabinet. At least once or twice a year brush or vacuum lint and dirt from the condenser for efficient performance by unscrewing the grille on the bottom front of the cabinet.

Cabinet: The painted cabinet can be washed with mild soap and water and thoroughly rinsed with clear water. Never use abrasive scouring powders.

Interior: Wash interior compartment with mild soap and water. Do not use an abrasive powder, solvent, polish cleaner or undiluted detergent.

Glass Door: Use a glass cleaner or mild soap and water and soft cloth to clean the glass door model. Do not use any abrasive powders.

Door Gasket: The vinyl gasket may be cleaned with mild soap and water, a baking soda solution or a mild scouring powder.

Light Tube Replacement: WARNING! DISCONNECT THE POWER CORD BEFORE ATTEMPTING LIGHT TUBE HOUSING ASSEMBLY REPLACEMENT. Failure to do so may result in an electrical shock that could severely injure you.

This product uses one, 6 watt light tube to illuminate the interior of the beverage center. The light tube is a very reliable electrical component, but should it not function properly, please call the dealer you pur- chased your beverage center from for a replacement light tube housing assembly. Use only an original equipment light tube housing assembly from your dealer or manufacturer.

Using a 5/16” hex-head driver, remove the two hex- head screws holding the old light tube housing assembly in place. Disconnect the electrical plug from the cabinet’s electrical receptacle and discard the old light tube housing assembly. Reconnect the electrical plug of the new light tube housing assem- bly to the cabinet’s electrical receptacle. Make sure it is secure and fully inserted.

Using the 5/16” hex-head driver, resecure the two hex-head screws back into their original positions to fasten the light tube housing assembly to the top of the cabinet.

Re-use the original two screws to secure the light tube housing in place. Plug the beverage center into the electrical socket. Check to see if the light tubes oper- ate properly. Your light tube’s replacement is complete.

The light tubes are not covered by your guarantee. A replacement light tube housing can be obtained from your service provider or from Marvel Industries.

What to do in

the Event of a Power Failure

Most power failures are corrected within two hours and will not affect the unit’s temperature providing you minimize the number of door openings while the power is off. A gradual rise in temperature should not have any adverse effect on your wine if power is out for a longer period. If it is extremely hot, you may want to move your wines to the coolest location you can find until power is restored.

Appliance Features

Adjustable Temperature Control: Please see “how to Operate Your Refrigerated Beverage Center” on page two.

Interior Light and Switch: The interior light makes it easy to view the contents of your beverage center. When the switch is in the

“OFF” position, the light will come on when the

door is opened. When the switch is pushed such that the “red” portion of

the rocker is showing, the

switch is in the “on” position and the interior light will stay on continuously. Remember to turn the off the light when it is no longer needed.

3