Master Bilt MCR-33-102PT, MCR-33-101PT dimensions Bid Specifications

BID SPECIFICATIONS

Item no. MCR-33-______

Provide______ ( ) Roll-in or

Pass-thru Blast Chiller(s) Master-Bilt model number MCR-33-______.

Blast chiller to be provided with stainless steel construction and polyurethane foamed-in- place insulation. Blast chiller will feature high velocity forced air convection through evaporator coil.

Probes with sequential read- out display will be supplied for food temperature recording (four probes in MCR-33-101 model, eight in MCR-33-102).

An automatic chill cycle control with food temperature probes is also supplied.

A thermometer will be pro- vided for recording blast chiller ambient air temperature. Ther- mometer will require optional printer for record of tempera- tures.

Roll-in blast chillers will con-

tain one 30" x 78" flush mount- ed, polyurethane foamed door. Pass-thru models will contain two doors. Doors will be provid- ed with a 36" high 16 ga. stainless steel kickplate on the exterior. Doors will also be supplied with a hold-open feature, magnetic gas- kets and gasket heater.

Blast chillers will be provided with an air- or water-cooled con- densing unit depending on ap- plication requirements.

Blast chiller will be equipped with a standard exterior mount- ed control panel featuring the following:

•On/off switch

•Digital readout of interior ambi- ent temperature and probe tem- peratures

•Digital cycle timer for timed chilling

•Microprocessor control system enclosed in easily accessible box

•Automatic defrost cycle and hold cycle

•Audible alarm at end of chill- ing cycle

•Six programmable one-touch preset chilling programs for easy use

Blast chillers will be supplied

with stainless steel racks (one rack for MCR-33-101/33-101PT, two for MCR-33-102/33-102PT) mounted on heavy-duty swivel casters. Racks accommodate

26 pans, 12" x 20" x 21/2", two per each of 13 ledges. Each pan holds up to 10 lbs. of food for to- tal rack quantity of 260 lbs. Di- mensions of rack are 241/2" wide x 27" deep x 685/16" high.

Blast chillers to have standard limited one year extended com- pressor warranty (optional four year extended warranty avail- able) with one year limited parts and limited 10 year for panels. Blast chillers will be UL and

C-UL listed and UL EPH classified.

NOTE: All specifications subject to change without notice.

908 Highway 15 North • New Albany, MS 38652

PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com

1287 - 2/08-web ©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.