Installation Step 7
Install the Light
Install the Light
•Install a 75 watt maximum light bulb in the socket. The light will turn ON and remain lit for approximately
•If the bulb burns out prematurely due to vibration, replace with a "Garage Door Opener" bulb.
75 Watt Max.
Light Bulb
Opener
Installation Step 8
Attach the Manual Release
Rope and Handle
|
| Overhand |
|
| Knot |
Trolley |
| Trolley |
| Rope | Release Arm |
|
| |
|
| Manual |
| Overhand | Release Handle |
|
| |
| Knot |
|
WARNING
Do not use the red handle to pull the door open or closed. The rope knot could become untied and you could fall. Use the manual release only to disengage the trolley and, if possible, only when the door is closed.
If the door is open when the handle is pulled, the door could close inadvertently if it is not properly balanced.
•Thread one end of the rope through the hole in the top of the red handle so "NOTICE" reads right side up as shown. Secure with an overhand knot.
The knot should be at least 1" from the end of the rope to prevent slipping.
•Thread the other end of the rope through the hole in the release arm of the outer trolley.
•Adjust rope length so the handle is 6 feet above the floor. Secure with an overhand knot.
If it is necessary to cut the rope, heat seal the cut end with a match or lighter to prevent unraveling.
14