
2
18
| A |
D | 10 |
|
D
B
STEP 9.
Align holes on assembled side shelf
(18)with holes on grill body (2) and leg bracket (10) as shown.
Insert phillips head screw (A) through holes on body (2) into side shelf (18). Secure using hex flange nuts (D).
Attach shelf support brackets (17) to top holes in leg bracket (17) using phil- lips head screws (B). Secure using hex flange nuts (D).
Do not fully tighten screws at this time.
2
A
D
7
B
STEP 11.
Align holes on assembled front shelf
(6)with holes on grill body (2) and legs as shown.
Insert phillips head screw (A) from inside grill body to front shelf (6). Secure using hex flange nuts (D).
Attach shelf support brackets (7) to grill legs using phillips head screws
(B). Secure using hex flange nuts (D).
Tighten all hardware at this time.
17
9
6
D
A
7
6 | STEP 10. |
|
Attach shelf support brackets (7) to front shelf (6) using phillips head screws (A).
Note: Position brackets so sharper angled ends are used to connect to grill legs.
Do not fully tighten at this time.
STEP 12.
Steps 12-15 require assistance.
Get a helper!
Align grill lid (1) with grill body (2) as shown. Secure grill lid (1) to grill body
(2)using carriage bolt (F).
Repeat step on opposite end.
1
F
2
9 | 10 |