Masterbuilt 20043111, 20043011 manual Assembly Instructions, Frequently Asked Questions

ASSEMBLY INSTRUCTIONS

	Before assembly read
	instructions carefully.
	This unit is heavy. Do not
	assemble without assistance.
8	Tools needed for assembly:
9	Adjustable Wrench
	Phillips Head Screwdriver

Assemble grill on a clean, flat surface.

CAUTION: Use caution during the assembly process.

Some component are heavy.

STEP 1.

Pay close attention to when assem- bling grill legs. Right legs are shorter to accommodate wheels.

Insert right short leg (8) into left long leg (9) as shown.

Repeat step 1 to assemble second set of legs.

STEP 2.

Steps 2-3 require assistance. Get a helper!

Insert storage shelf (14) into holes of assembled grill legs as shown.

STORAGE SHELF

INSERTION HOLE

9 8

14

FREQUENTLY ASKED QUESTIONS

Q: The paint finish inside my lid is peeling. What can I do?

You are seeing a deposit of grease and smoke that collects during normal use that resembles paint. These carbon deposits are non-toxic, but you may want to regularly remove the build-up. Remove buildup using a brass or stiff bristle brush before grilling. Future build-up can be avoided by simply wiping the grill lid while slightly warm with a mild soap-and-water solution.

Q: When can I put my meat on the grill?

Grill is ready for use when charcoal is ashed over and no visible flames are present.

Q: How do I regulate the heat on my grill?

Adjusting the dampers will increase and decrease airflow and heating.

SAFE STORAGE AND MAINTENANCE

•Inspect bolt, hex lock nut and hex flange nut tightness on a regular basis to ensure grill is in safe working condition.

•ALWAYS allow grill to cool completely before handling.

•ALWAYS empty charcoal pan after use only when ashes have completely cooled. This will help prolong charcoal pan life.

•Clean grill, including special surfaces such as cooking grates with mild cleaning agents. Wipe outside of grill with damp rag. DO NOT use oven cleaner.

•ALWAYS cover and store cold grill in a protected area.

•Indoor storage of grill is permissible only if the charcoal has burned to a complete ash AND is cold. Remember to remove cold ashes before storing.

•Grill is made of steel and may rust over time. If rusting occurs on outside surfaces, clean area with sand paper or steel wool, then cover with heat resistant paint.

•If rusting occurs on the inside surface of grill, clean area with sandpaper or steel wool, then coat with cooking oil.

•NEVER USE PAINT ON INSIDE SURFACES OF GRILL

14

5