Manuals / Matrox Electronic Systems / Computer Equipment / Network Card

Matrox Electronic Systems 10574-MT-0102 manual Novell NetWare DOS Client

Models: 10574-MT-0102

1 10

Page 6

4.Insert the driver diskette into the PC’s floppy drive. Specify the directory a:\winnt and click OK:

5.By default, the Fast NIC is configured for AutoDetect mode. However, you can use the Properties window to force the speed and duplex settings of the card:

Novell NetWare (DOS Client)

To install the driver support software for a Novell NetWare DOS client, perform the following steps:

1.Copy the contents of the a:\novell directory to the c:\nwclient directory on the PC:

copy a:\netware\client\dos\. c:\nwclient

NOTE:If necessary, substitute the appropriate directory name if c:\nwclient is not the name of the directory containing the NetWare client software.

2. Use the DOS Edit command to create a batch file called startnet.bat that contains the following commands:

c:\nwclient\lsl

c:\nwclient\l100

c:\nwclient\ipxodi

c:\nwclient\vlm

Page 6

Image 6

$Matrox Electronic Systems 10574-MT-0102 manual Novell NetWare DOS Client, copy a\netware\client\dos\*.* c\nwclient$

Contents

B System Requirements C Installing the CardA Before You Begin Matrox FastNIC 10/100E Installing the Software Drivers D Selecting the Right CableWindows 3. Click on the Have Disk button Windows NT 1. Double-click on the following icons 2. Click on the Add button3. Click on the Have Disk button Novell NetWare DOS Client copy a\netware\client\dos\*.* c\nwclientc\nwclient\lsl c\nwclient\l100 c\nwclient\ipxodi c\nwclient\vlm Other Troubleshooting Information G TroubleshootingDiagnostic Utility a\ezshoot\shooterE-mail H Obtaining Technical SupportWorld Wide Web TelephoneSpecifications J Regulatory Compliance FCC Compliance StatementIndustry Canada Compliance Statement

Novell NetWare (DOS Client)

copy a:\netware\client\dos\*.* c:\nwclient

c:\nwclient\lsl

copy a:\netware\client\dos\. c:\nwclient