185
Using the Matrox MPEG-2 I-frame HD codec
MPEG-2 I-frame HD codec workflow example for online editing
In this workflow example, the Matrox MPEG-2 I-frame HD codec is used to
capture video clips for u se in an online editing project. T he clips are captured
with Matrox RT.X2 at a data rate of 90 Mb/sec or higher and then used to
complete an online editing project. A VFW application, such as Adobe After
Effects, is used to create a composition that is rendered using the VFW MPEG-2
I-frame HD codec and imported into the online editing project. When the edit is
complete, it is exported to tape for broadcast.
This workflow scenario is represented in the following diagram:
Exported to tape as finishing-quality
HD video for broadcast
Matrox MPEG-2 I-frame HD codec
set at 90Mb/sec or higher used to
capture clips
Matrox online editing project using
a 1440x1080iMPEG-2 I-frame
project preset
VFWapplication, such as
AdobeAfter Effects, uses
the MPEG-2 I-frame HD
clips.The compositing
project is rendered using
the Matrox VFWMPEG-2
I-frame HD codec.
Clips rendered using
the Matrox VFW
MPEG-2 I-frame HD
codec are imported into
the online editing
project.
MPEG-2 I-frame HD clips used
in a VFWapplication on the
RT.X2system or an offline
editing station.
Analog component video
footage shot as 1080i@
29.97 fpsor 25fps