Matrox Electronic Systems Matrox RT.X2

Chapter 4, Setting Up Realtime Effects withAdobe Premiere Pro

$Border Type Allows you to select the type of border you want (None,

Flat, Gradient, or Alpha Edge). Click the triangle on the right to expand

the list of border types.

¦NoteThe Alpha Edge border type is for use with alpha-keyed graphics

only.

$Border Width Use this contr ol to adjust the border along th e X and Y

axes simultaneously. The higher the value, the wider your border becomes.

If you clear Fixed Aspect Ratio, you can adjust each axis individually.

$X Border Width Use this contr ol to adjust the border along th e X axis.

The higher the value, the wider your border becomes.

$Y Border Width Use this co ntrol to adjust the border al ong the Y axis.

The higher the value, the wider your border becomes.

$Border Inside Softness Sets the border softness on the inside edge of

your border. The higher the softness value, the less sharp the edge or border

becomes.

$Border Outside Color Use the color picker or eyedropper to select the

color you want for your border, or the outside edge of your border if you

selected Gradient as your border type.

$Border Outside Transparency Sets the transparency of your border, or

outside edge of your border if you selected Gradient as your border type.

Levels range from opaque (0) to fully transparent (100).

¦NoteThe next two properties (Border Inside Color and Border Inside

Transparency) are available only if you selected Gradient as your border

type.

$Border Inside Color Use the col or picker or eyedroppe r to set the inside

color of your border, which will create a gradient between this color and

the outside color of your border.

$Border Inside Transpa rency Sets the transparency of the inside color

of your border.

$Round Corner Size Allows you to round the corners on the edges of

your border.

$Corner Point Offset A llows you to move the position of the corner

points of your border so that you can create various shapes for your 3D

DVE. Negative values bring the corner points towards the center of the clip,

while positive values move the corner points outward.

lick here to

select your

border type