17
Setting your system’s volume levels
7Repeat steps 5 and 6 for every audio input source that you intend to use with
your Matrox RT.X2 system. For example, if you intend on recording audio
from a microphone, set the volume levels for the Microphone input.
8Click OK.
9Click OK to close the dialog box.
For Windows XP1Double-click the speaker icon on the Windows taskbar.
¥Tip If you don’t see the speaker icon on your Windows taskbar, run
Sounds and Audio Devices from the Windows Control Panel, select Place
volume icon in the taskbar, then click OK.
2Choose Options > Properties.
3From the Mixer device list, make sure that the audio device you want to use
with your Matrox RT.X2 system is selected.
4Select the Playback option, then select all check boxes in the list. Click OK.
5For each of the controls (Li ne-in, Wave, etc.), make sure the Vol u m e sliders
are at an appropriate level, such as at half-level. As well, clear all the Mute
check boxes.
¦NoteIf you have an active audio stream connected to an input on your audio
card via the RT.X2 breakout box, you must mute the input to avoid hearing
the audio when you’re not working in Premiere Pro.
6Choose Options > Properties.
7Select the Recording option, then select all check boxes in the list. Click
OK.
8For each of the controls (Line-in, Microphone, etc.), make sure th e
Volu me slider s are at an appropriate level, such as at half- level. As well, if
available, clear all the Mute check boxes.
9Close the dialog box.