Matsushita MPE-33R warranty WIRING DIAGRAM - 120 VOLT, WIRING - 120 VOLT, Ground, 120 V 1600W

WIRING DIAGRAM - 120 VOLT

Wiring diagrams are provided here for reference purposes only. This information is also provided on schematics attached directly to the appliance on the left side.

CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DAN- GEROUS APPLIANCE OPERATION.

L1 = BLACK (POWER)

L2 = BLACK (POWER) G = GREEN (GROUND) N = WHITE (COMMON)

N1 = WHITE (COMMON)

N2 = WHITE (COMMON)

Outside Switches
	Wall Switch	Wall Thermostat
	(power on/off)

Control Panel	Control Panel	Control Panel
	(power on/off)
Heater On/Off		Flame / Ember
Switch		On/Off Switch

	GROUND
MAIN POWER	N
HOME POWER	L
SUPPLY
120 V AC.

Figure 19

N

N2

L2

N1

L1

	GROUND
		P-L
	Light (L)	L-LIGHT
	Flame Motor (L)	L-M
	Fan Motor (L)	L-FAN
	Heater 2 (L)	L-R2	Relay 1
	Heater 1 (L)	Relay2
		R1-L
t104° C	t90°C

P SIP2

	L-FLAME	N-FLAME	SIP6
	K-P	K-
REMOTE	SIP4	H SIP3	TEM.

Circuit

Board

Temperature Sensor

Remote Sensor

P-TRA.

N-M	N-FAN	POWER-N	N-LIGHT
		SIP13	SIP11
	SIP13		T-P	SIP7

Transformer

10

WIRING - 120 VOLT

See Power Supply Specifi-		N		WHITE
cations on Page 3.					N
				BLUE
					N1
				BLUE
					N2
	HOME POWER -
		L1	120 V AC	BLACK	L1	FIREPLACE WIRE
	SUPPLY 120 V AC.
						HARNESS
				ORANGE	L2
	GROUND		YELLOW AND GREEN		GROUND
			120 V 1600W

Figure 20

WARNING

Do not install or operate this fireplace through a switch wired in the 120 V AC or 240 V AC circuits. The only approved wiring for a switch is through the low voltage circuit (24 V AC) as shown on Page 14.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.