FINAL FINISHING

Materials such as brick and tile can be extended down to the top of the fireplace. Do not extend down, covering the outlet or glass enclosure panel (optional kit).

There are a wide variety of “finished looks” for these fireplaces, from formal wall decor with elaborate mantels to rustic wood paneling or warm brick facings.

Mantel Cabinet or Accent Trim Installations

Note: Ensure the circuit breakers for the power supply are turned on.

This appliance can be operated either from the manual control panel (see Figures 4 & 5) or by using the remote control, wall switch or wall thermostat (optional kits).

The manual controls are located on the firebox floor on the front left (see Figure 5). If an optional glass enclosure is installed, it must be removed to access.

Main Power ON/OFF Switch

When the main power switch is turned on, power is supplied to the fireplace. This switch must be on for all other switches to operate.

Heater ON/OFF Switch

When this switch is turned on, the heater will emit heat in the temperature range selected (see Figure 6; G, H & I). The fireplace can operate with or without heat.

Flame / Ember On/Off Switch:

Turns lights on inside ember bed and flame cylinder.

An optional mantel cabinet kit or an accent trim kit is available from your dealer (see Page 18). These options give the appliance an attractive finished look.

Hearth

An aesthetically pleasing fireplace hearth can be installed, if desired (see hearth protection on Page 5).

BREAK-IN PERIOD:

During the first few initial uses of this heater, there may be a release of a slight, harmless odor. This odor is a normal occurrence caused by the initial heating of the internal heating elements

MANUAL CONTROL PANEL

Main Power On/Off (rear most switch)

OnOff

Heater On/Off (center switch)

OnOff

Flame / Ember On/Off (front most switch)

OnOff

•When using the main power on/off switch inside the body, the power on/off switch outside the body (optional wall switch kit) must be in the OFF posi- tion.

•When using power on/off switch outside the body (optional wall switch), the power on/off switch inside the body must be in the OFF position.

•When using the remote control, the power on/off switch inside the body and the wall switch (optional kit) must be on the OFF position.

6

and should not reoccur.

MANUAL CONTROL PANEL OPERATION

(refer to Figures 5 & 6)

Once this appliance has been properly installed and connected to the power supply as defined in this manual, it is ready to operate.

Figure 4

Manual Control Switches are located behind pull screen on inside floor

Figure 5

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Page 5 Page 7
Page 6
Image 6
Matsushita MPE-33R warranty Final Finishing, BREAK-IN Period, Manual Control Panel Operation
Page 5 Page 7

MPE-33R specifications

The Matsushita MPE-33R is a remarkable addition to the world of electronic devices, particularly known for its innovative features and exceptional performance. This high-performance product embodies the core principles of reliability, efficiency, and cutting-edge technology that Matsushita has championed for decades.

One of the standout characteristics of the MPE-33R is its advanced audio-visual capabilities. Equipped with a high-definition display, this device provides crystal-clear visuals that enhance user experience whether for entertainment or professional use. The screen supports a wide spectrum of colors, ensuring vibrant and lifelike images that captivate the audience.

In terms of audio, the MPE-33R integrates state-of-the-art sound technologies. With its powerful built-in speakers and support for various audio formats, users can enjoy immersive sound quality that complements its visual prowess. This makes it ideal for both movie enthusiasts and music lovers alike, providing an all-encompassing sensory experience.

Connectivity is another significant strength of the Matsushita MPE-33R. It boasts a range of connectivity options, including Wi-Fi and Bluetooth capabilities, which allow users to effortlessly connect to the internet or pair the device with other smart gadgets. This feature enhances its versatility, making it a hub for all digital interactions.

Additionally, the MPE-33R is designed with user-friendliness in mind. Its intuitive interface and customizable settings ensure that navigating through various applications and features is seamless. This attention to user experience is further reflected in its long-lasting battery life, enabling extended usage without frequent recharges, which is a critical factor for users on the go.

Quality and durability are hallmarks of the Matsushita brand, and the MPE-33R is no exception. It is constructed with high-quality materials that ensure durability, making it capable of withstanding the rigors of daily use while maintaining aesthetic appeal.

In conclusion, the Matsushita MPE-33R is a true embodiment of innovative technology combined with practical usability. Its exceptional audio-visual features, strong connectivity options, user-centric design, and robust build quality make it a standout choice for a wide range of users. Whether for personal entertainment or professional applications, the MPE-33R delivers outstanding performance and reliability, solidifying Matsushita’s reputation as a leader in electronic innovation.
Top Page Image Contents