MaxTech XT4871 Appendix B - Video Cable Pinout, Display Power Management Signaling DPMS

1024 x 768	70 Hz
1152 x 864	60 Hz
1280 x 1024	43 Hz

Deflection
Geometric distortion	H.<=2.5mm, V.<=2.5mm
Linearity distortion	H<=10%, V<=8%
Pincushion distortion	<=2mm
High voltage regulation	H<=4mm, V<=4mm(0-25FL)

Low radiation*	MPR-I specification
Front controls	Power, Brightness, Contrast, Horizontal-Size, Hori-
	zontal-Position, Vertical-Size, Vertical-Position,
	Pincushion,	Trapezoid
Power saving	Display Power Management Signaling (DPMS)
	SUSPEND mode 25W (Max.)
	OFF mode	5W (Max.)

Input voltage 100~240VAC, 50/60 Hz

Power consumption 85W maximum

Plug and Play DDC1, DDC2B

OperatingTemperature 5°~35°C

Environment Humidity 20~90%

Altitude0~10,000ft.

Connector 15 Pin D-Sub

*Low radiation monitors only.

Specifications subject to change without notice.

Appendix B - Video Cable Pinout

Figure D - Pin		PIN	SIGNAL	PIN	SIGNAL
Layout and Pin
		1	Red	9	No Pin
Assignment
Chart		2	Green	10	Digital Ground
		3	Blue	11	Monitor Sense 1
					(Jumper to Pin
					10)
11 6	1	4	Monitor Sense 1	12	SDA
			(Jumper to Pin 10)
		5	Monitor Sense 1	13	Hor. Synch.
			(Jumper to Pin 10)
1510	5	6	Red Return	14	Vert. Synch
		7	Green Return	15	Data Clock (SCL)
		8	Blue Return

6