MaxTech XT5861 user manual Installation, Attaching the Base, Connecting the Cable

signal is re-enabled the monitor returns to normal operation.

The monitor enters DPMS OFF mode when the computer turns off both the Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 3W. When the synchronization signals are re-enabled the monitor returns to normal operation.

Section 2 - Installation

2.1 Attaching the Base

Figure 2-1 Connecting the Base

•Carefully place the monitor on its side or top.

•Insert the hooks on the swivel base into the slots in the bottom of the monitor. Push down and forward on the base until the it snaps into place.

•Place the display upright in an appropriate location.

2.2 Connecting the Cable

Figure 2-2 Monitor Connections

Expansion boards

COM1 COM2 LPT1 VIDEO

3