MaxTech XT7800 user manual On-Screen Display

5.Contrast Control

Adjusts the display contrast.

6.Memory Recall

Push to reset the display to the default parameters.

7-10 On-Screen Display Controls

The On-Screen Display (Refer to Section 3.1) is controlled using buttons 7 through 10. The On-Screen Display is enabled by pressing any of these buttons.

7.ADJ+

Pressing this button will increase the value of the highlighted setting.

8.ADJ-

Pressing this button will decrease the value of the highlighted setting.

9.Cursor+

Pressing this button highlights the next display parameter to be adjusted, A through H (See Figure 3-2).

10. Cursor-

Pressing this button highlights the previous display parameter to be adjusted, A through H (See Figure 3-2).

11. Status/Save

This control has two functions: A) It displays the current Horizon- tal frequency and Vertical frequency along with the current screen resolution. B) If the On-Screen Display is active, it saves any changes made and exits the On-Screen Display.

12. Rotation Control (rear of unit)

Adjusts the amount the display area will tilt.

3.1On-Screen Display

Figure 3-2 On-Screen Display Options

A B C D E

F G H

A. Horizontal-Size

Adjusts the display width. The ADJ+ button increases the width. The ADJ- button decreases the width.

B. Vertical-Size

Adjusts the display height. The ADJ+ button increases the height. The ADJ- button decreases the height.

5