MaxTech XT7800 user manual Installation, Attaching the Base, Connecting the Cable

Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 5W. While in this mode the first and second LEDs in the Power Indicator (LEDs A and B in Figure 3-1) are off. When the synchronization signals are re-enabled the monitor returns to normal operation.

Section 2 - Installation

2.1 Attaching the Base

Figure 2-1 Connecting the Base

•Carefully place the monitor on its side or top.

•Insert the hooks on the swivel base into the slots in the bottom of the monitor. Push down and forward on the base until it snaps into place.

•Place the display upright in an appropriate location.

2.2 Connecting the Cable

•Make sure that power to the monitor and the computer is off.

•Connect the cable from the back of the monitor to the video connector

Figure 2-2 Monitor Connections

Video Cable

COM1 COM2 LPT1 VIDEO

3