Maxtor 10K IV manual Atlas 10K, 10,000 RPM ENTERPRISE CLASS HARD DRIVE, Extraordinary Value

ENTERPRISE

10,000 RPM ENTERPRISE-

CLASS HARD DRIVE

EXCEPTIONAL CAPACITY AND PERFORMANCE

•Industry’s largest capacity 10K RPM drive

•Highest performance— 4.3ms seek time•Second-generation Ultra320 SCSI with MaxAdapt™•Maximum sustained data rate up to 72MB/sec

•8MB cache

EXTRAORDINARY VALUE

•Lowest cost-per-gigabyte disk drive solution•Double the capacity of 15K RPM drives

•SCSI investment protection

Atlas® 10K IV

SCSI HARD DRIVE

36GB 73GB 147GB

The Industry’s Highest Performing 10K RPM Enterprise Class HDD with Leading Capacity for Demanding High- Bandwidth Applications

The Workhorse Just Got Faster

Introducing the Maxtor Atlas™ 10K IV drive, the industry’s fastest and largest performing 10K RPM hard disk drive. Its 147GB capacity point and 4.3 ms seek time provide just the right combination of perform- ance and capacity to meet mainstream enterprise hard disk drive mar- ket requirements. The Atlas 10K IV drive provides up to a 24% increase in sustained data transfer rates and delivers 5% faster seek times than prior 10K RPM hard disk drive generations. The drive is equipped with the Maxtor second-generation Ultra320 SCSI interface, which includes MaxAdapt™, Maxtor’s implementation of Adaptive Active Filtration technology. MaxAdapt is a closed-loop method of improving signal quality by amplifying the fundamental frequency of the signal in the receiver while filtering noise and other undesirable components. MaxAdapt allows the drive to adapt to changing system conditions and components. This translates into lower error rates, easier integra- tion, and increased bus efficiency for optimal system performance. MaxAdapt is only available on Maxtor SCSI hard disk drives.

The Atlas 10K IV drive is designed to handle the most demanding high-bandwidth and high-capacity enterprise server applications.

SUPERIOR RELIABILITY

•MaxAdapt for better signal quality

•24x7 dependability

•Proven Atlas drive architecture and firmware

•Shock Protection System™

•Thermal sensor

•S.M.A.R.T. features

Best-fit Enterprise Applications

Enterprise computer users now have

the highest capacity and performance

10K RPM drive for use in:

• Multi-stream video	• NAS environments
and audio	• Data warehousing
• RAID applications	• SAN environments
• Large file transfers	• Email servers
• Enterprise servers	• Supercomputing
• High-end graphics	• Electronic cinema
• Video servers	• Many others
• Imaging

Maxtor Ultra320 SCSI

The Maxtor Ultra320 SCSI interface implementation has proven fully inter- operable with all major SCSI and SCSI RAID controller manufacturers, and it is backwards compatible with prior SCSI interface standards.