Product Specifications
3.5Power Requirements
MODE | 12V (MA) | 5V (MA) | POWER (W) |
|
|
|
|
|
|
|
|
1562 | 621 | 21.8 | |
|
|
|
|
Seek | 502 | 392 | 8.0 |
|
|
|
|
Read/Write | 461 | 414 | 7.6 |
|
|
|
|
Idle | 425 | 230 | 6.2 |
|
|
|
|
Standby | 36 | 229 | 1.6 |
|
|
|
|
Sleep | 36 | 228 | 1.6 |
|
|
|
|
Note: Power numbers are typical values.
3.6Power Mode Definitions
Spin-up
The disk drive is spinning up following initial application of power and has not yet reached full speed.
Seek
A random access operation by the drive.
Read/Write
Data is being randomly read from or written to the drive.
Idle
The drive is spinning, the actuator is parked and powered off and all other circuitry is powered on. The drive is capable of responding to read commands within 40 ms.
Standby
The motor is not spinning. The drive will leave this mode upon receipt of a command that requires disk access. The
Sleep
This is the lowest power state – with the interface set to inactive. A software reset is required to return the drive to the Standby state.
Maxtor DiamondMax 8S 40GB SATA |
