Installation
Table 4-2 Device Plug Connector Pin Definitions
Signal Segment
S1
S2
S3
S4
S5
S6
S7
Ground | 2nd Mate | |
A+ | Differential signal pair A from Phy | |
A- | ||
| ||
Ground | 2nd Mate | |
B- | Differential signal pair B from Phy | |
B+ | ||
| ||
Ground | 2nd Mate |
Signal Segment “L”
Central Connector Polarizer
Power Segment “L”
Power Segment
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
V33 | 3.3V power1 |
V33 | 3.3V power1 |
V33 | 3.3V power, |
Ground | 1st mate |
Ground | 2nd mate2 |
Ground | 2nd mate |
V5 | 5V power, |
V5 | 5V power |
V5 | 5V power |
Ground | 2nd mate |
Reserved | 1. The pin corresponding to P11 in the |
| backplane receptacle connector is used to |
| enable staggered |
| features, when used in backplane enviro- |
| ments. |
| 2. The corresponding pin to be mated with |
| P11 in the power cable receptacle connec- |
| tor will always be grounded. |
Ground | 1st mate |
V12 | 12V power, |
V12 | 12V power |
V12 | 12V power |
POWER SEGMENT KEY
Note 1. 3.3V power is not used by DiamondMax 8S 40GB SATA
