Unit Information, Installation Requirements

Quick Start Card

MaxAttach NAS 6000 End User License Agreement (EULA)

MaxAttach NAS 6000 Release Notes

MaxAttach NAS 6000 Installation and Documentation CD containing:

MaxNeighborhood Discovery and Setup Wizard application

MaxAttach NAS 6000 Documentation

Standalone O/S Help Files

1: Unit Information

Please record the following information from your system:

Model Number:_______________________________

Serial Number:________________________________

Microsoft Windows O/S 95, 98, Me, NT (SP5), or 2000

Internet Explorer version 5.01 or higher; version 5.5 or higher recommended

10/100 Mbps Ethernet NIC card

Client for Microsoft Networks enabled over TCP/IP

CD-ROM drive

All systems: two CAT-5 and/or one Fiber Connection NIC cable/s

Rack-mount systems only: standard 19” rack with at least 4U space, two AC power strips

1.Mount in rack with provided hardware.

2.Install two power supply cords and connect to power strips.

3.Install EMU cable between CPU I/O Panel and EMU port as shown at right.

4.Connect the MaxAttach to your network using at least one NIC cable.

5.Make sure back panel switches are both “OFF” or “0” position. Route AC power strip cords to AC power source.

Revision 2.0.03A

000001576