Maxtor NAS 6000 quick start Quick Start Card, Welcome to MaxAttach NAS, Box Contents

MaxAttach NAS 6000

MaxAttach NAS 6000 Quick Start Card

Quick Start Card

This Quick Start Card is only for a single MaxAttach NAS 6000 Base Unit enclosed within a cabinet or a single rack-mountable Base Unit. For other configurations, see the MaxAttach NAS 6000 Installation and Configuration Guide on the enclosed MaxAttach NAS 6000 Installation and Documentation CD.

Welcome to the

MaxAttach NAS 6000

Thank you for choosing a MaxAttach NAS 6000 system. Take a moment to verify the contents in your box and note the model and serial numbers for future reference. The procedures outlined here assume that you have purchased a MaxAttach NAS

6000 Base Unit system enclosed within a cabinet, or a rack-mountable MaxAttach Base Unit system, and that you are highly familiar with networking and system

administration basics. If not, please refer to either the appropriate Getting Started Guide based on your system’s configuration, or the Installation and Configuration Guide on the enclosed CD.

Box Contents

Equipment:

￿MaxAttach NAS 6000 file server (with rack mount hardware if required)

￿EMU/CPU Serial Cable (for rack mount systems)

￿Two AC power cords

Revision 2.0.03A 1 000001576