Maytag 130116 manual Charging Tips, For Service and Information Within the USA

●After selecting the proper charge rate and double-checking that the proper charge mode is selected, press the START/STOP button to begin the charge process. During the charge process the red LED will be steady. If you need to stop the charge process before charging is complete, press

the START/STOP button again or disconnect your battery from the charger.

IMPORTANT If there is a battery error (i.e., reversed polarity or internal short), the charge rate LEDs will blink together shortly after you press the START/STOP button. If this occurs, remove the battery from the charger and check all connections and battery integrity before attempting to charge the battery again.

●At the end of the charging process, the charger will detect when the battery reaches its peak and will stop fast charging. At this point, the charge rate LED will begin to blink, indicating that the charger is now in trickle mode and that the battery is ready for use.

Charging Tips:

●Always unplug the charger when you are finished charging.

●Let the charger cool between uses, especially on hot or humid days.

●New batteries should be charged at the lowest recommended charge rate for the first 3 charging cycles (5 cycles for LiPO cells). This will ensure your batteries’ long life and optimal capacity.

●Always use your charger on a hard surface. Never use it while setting on carpeted surfaces. Carpeted surfaces will block the cooling vents on the bottom of the charger, which can cause the charger to overheat during use.

●Most LiPO cells can be charged at 1C, but charging at .5C will produce a better charge and prolong the life of the battery. It will also lessen the chance of damaging the battery during the charging process.

Your new WattAge Charge-It-All Sport AC/DC Peak Charger is guaranteed to be free of workmanship and component error for a period of 90 days starting from the original time of purchase. Warranty claims must be accompanied by an itemized sales receipt that shows the purchase date.

In that WattAge has no control over the final use of this product, by installing and using the product, the user accepts all liability resulting from or included with the installation and use of this product. In no instance will the liability cost of the charger exceed the original purchase price of the charger.

FOR SERVICE AND INFORMATION WITHIN THE USA:

Global Services/WattAge Customer Care

18480 Bandilier Circle

Fountain Valley, CA 92708

Phone: (714) 963-0329 Fax: (714) 964-6236

Email: service@globalhobby.net

http://globalservices.globalhobby.com

WattAge IS EXCLUSIVELY DISTRIBUTED IN THE USA BY

GLOBAL HOBBY DISTRIBUTORS

All contents copyright © 2005, Global Hobby Distributors

Version V1.0 January 2005

3