Tools needed for installation
Open end wrenches 17 mm and 13 mm
Level
Wood block
Ruler or measuring tape
Parts supplied:
AB
C
F
Options
Pedestal
A pedestal will add to the total height of the washer for a total height of 53.5" (1359 mm).
D 
E
G
Optional pedestal
This pedestal is available in several colors.
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washers (4)
D. Transport bolt hole plug (4)
E.Beaded strap
F.Drain hose G. Hose clamp
Alternate Parts
Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the
If You Have | You Will Need to Buy |
Laundry tub or standpipe | Sump pump system (if not already available) |
taller than 96" (2.4 m) |
|
|
|
Overhead sewer | Standard 20 gal. (76 L), 30" (762 mm) tall drain tub or |
| utility sink and sump pump (available from local plumbing |
| suppliers) |
|
|
Floor drain | Siphon break, Part Number 285834; additional drain hose |
| Part Number 8318155; and connector kit, Part |
| Number 285835 |
|
|
Drain hose too short | 4 ft (1.2 m) drain hose extension kit, Part Number 285863 |
|
|
Water faucets beyond reach | 2 longer water fill hoses: |
of fill hoses | 6 ft (1.8 m) Part Number 76314, |
| 10 ft (3.0 m) Part Number 350008 |
To order, call the dealer from whom you purchased your washer or refer to the “Assistance or Service” section.
Pedestal Height | Color | Part Number |
10" (254 mm) | White | MHP1000SQ |
|
|
|
10" (254 mm) | Black | MHP1000SB |
|
|
|
15.5" (394 mm) | White | XHP1550VW |
|
|
|
15.5" (394 mm) | Black | XHP1550VB |
|
|
|
15.5" (394 mm) | Slate | XHP1550VE |
|
|
|
15.5" (394 mm) | Crimson Red | XHP1550WR |
|
|
|
15.5" (394 mm) | Oxide | XHP1550VJ |
|
|
|
15.5" (394 mm) | Evergreen | XHP1550VP |
Stack Kit
Are you planning to stack your Maytag washer and dryer? To do so you will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section. Ask for Part Number 8212640.
5
