Storing | the | Refrigerator |
|
|
|
|
Vacations |
|
| Moving |
|
|
|
If you will be gone | for a month | or less, leave the con- | When moving, | follow | steps | |
trols at the usual settings, |
| addition, remove | and carefully pack any items | tl | ||
During longer absences: |
| easily removable. | Ship | the refrigerator in an | u | |
a) remove all food, |
|
| position with the doors | taped shut. |
| |
b)shut off the ice maker (if installed) and the valve
where you tapped into the water line to supply the refrigerator,
c)disconnect the refrigerator from the electrical outlet,
d)clean and dry the refrigerator thoroughly,
e)leave the doors open to prevent odors.
Care & Cleaning
Refer to the chart on the following page for specific refrigerator cleaning guidelines.
Disconnect the | ] |
power cord before cleaning. |
Cleaning Under the Refrigerator
Your refrigerator can be rolled out for cleaning the floor
underneath. Raise the locking feet if engaged (see page 2). Pull the refrigerator straight out from the wall.
No Clean TM Commercial-dutl
Condenser
A clean condenser means more efficient refrig operation. Thanks to the unique design of tl_
Clean'" condenser, there is no longer a need for r( condenser cleaning in normal home usage surr,
ings.
Some operating environments may be partic dusty or greasy. In these situations, the condens_ be periodically cleaned to insure maximum effici
Replacing a Light Bulb
CAUTION: Disconnect the power cord before replacing light bulb(s). Wear gloves as protec; against possible broken glass.
Always use a standard 40 or 60 watt appliance bulb.
Refrigerator
There is a light bulb located under the top of the refrig- erator compartment,
•To remove the bulb cover:
Squeeze the tabs at the base of the cover. Using gentle downward pressure, the bulb cover should snap out.
•Unscrew the lightbulb and replace,
•Replace the bulb cover by snapping the tabs back into the appropriate slots.
Freezer
Some models are equipped with a freezer light_ light is located on the back wall of the freezer con ment, near the upper right corner.
To remove the bulb cover:
•Grasp the top and bottom of the bulb cover. Press areas of the attachment tabs, applying enough pr_ to unhook the tabs. At the same time, pivot the down and remove.
•Unscrew the lightbulb and replace.
•Replace the bulb cover by pivoting it back into plac snapping the tabs into the appropriate slots.
