STARTING THE
DISHWASHER
After loading the dishwasher and adding detergent, set the control knob to tile desired cycle and press tile appropriate option button(s),
NOTE: Water heating and dry" options can be used separately or together,
Next, rnn the water from the Bet water tap to clear the line of cold water before starting. Connect select con- vertible models to the lancet. See page 6.
Then, press the door nntil it latches. The cycle will begin with a drain prior to fill.
Indicator Light
DELAY START (select models) glows when this option is selected. The light stays on until the start of the cycle.
N HEATING DELAY glows to indicate that the cycle is being extended to heat the water to proper tempera- ture. The light corresponds to the 11!symbol around the
controlknob.
Adding a Forgotten Item
For best cleaning, the forgotten item should be added early in the cyele.
1.Unlatch the door.
2.Wait for tl_e water circulation to stop.
3.Open the door and add the item.
4.Close and latch the door.
5.The cycle resumes automatically.
SPECIAL TIPS
•Use HOT Water
Hot water dissolves and activates the detergent, dissolves grease from tile load and improves dD4ng results, ttefer to page 6 tbr more information.
• Use Proper Detergent Amount
For best soil remowfl, good &ying results and pre- vention of filming, etching and spotting, the proper
amount of detergent nmst be used. Befer to page ,5 for recommended amounts.
•Use a Rinse Aid
Regnlar use of a rinse aid improves dLying results and reduces spotting and filming. See page 5 for nlore information.
• Load the Dishwasher Properly
To ensure soiled surf'aces get adequate wash action, carefnlly fbllow the loading instructions on pages
• Select the Proper Cycle
The cycle selection depends on the amount of food soil on the load. See page 7 for cycle descriptions.
•Select Fan Dry Heat
For improved drying select FAN DR5'- HEAT.
Page 8