Setting water hardness
If you have a dishwasher with a water softener, you may need to change the setting, de- pending on the hardness level of the water. Phone your local Water Board to check the water hardness in your area. The dishwasher is set for low water hardness on delivery.
START
STOP
PROG
1.Switch off the dishwasher with the main switch.
2.Press the main switch while holding in the Start/Stop switch. Release the Start/Stop button.
3.Press the Program button from one to six times depending on the hardness of the water. Program symbols will light up as you press.
|
| Setting water hardness |
|
| ˚dH | ˚fH | |
|
|
|
|
|
|
|
|
* | * | * | * | * | * | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
45+
80+
START
STOP
*All program indicators extinguished: Machines without water softeners and machines with water softeners and low water hardness.
4.Press the Start/Stop button and the setting will be stored until next time you want to make a change.
34
