Combustible Mantel, Insert, Hearth Protection, Model, C310 with

Required Clearances

WARNING: BE ABSOLUTELY SURE THE DISTANCE BE- TWEEN THE HEATER AND THE SURFACE OF ANY COM- BUSTIBLE CONSTRUCTION IS NOT LESS THAN SHOWN ON THIS PAGE.

Model	*A	*B	*C	*D	E(1)

C310	USA-30”	USA -20”	20”	15”	8”
	CAN-787mm	CAN-584mm	508mm	381mm	200mm
C310 with	22”	12”	20”	8”	8”
mantel	559mm	305mm	508mm	200mm	200mm
and/or side
shields

Model	F (1)	G	H	J(2)	M

C310	24”	14-1/2”	22-1/2”	5-1/4”	50-1/2”
	610mm	368mm	572mm	133mm	1283mm
C310 with mantel	24”	14-1/2”	22-1/2”	5-1/4”	50-1/2”
and/or side	610mm	368mm	572mm	133mm	1283mm
shields

*Reduced clearances may be available for A, B, C and D dimensions per NFPA 211 - latest edition, Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Ap- pliances (in Canada CSA B365 - latest edition). See section on “Reduction of Appliance Clearance with Specified Forms of Protection.”

**Side view of optional mantel deflector shown.

(1)Hearth extension reductions: 2” (51mm) reduction for 2” (51mm) raised hearth. (USA & Canada) 24” minimum hearth extension on all stoves as measured from the door opening of the unit (16" [406mm] minimum hearth extension on all inserts as measured from the door opening of the unit). Minimum distance of floor protection to the side = 8” (200mm). This is measured from the sides of the door opening in the USA and from the sides of the insert in Canada.

(2)J = Maximum lintel depth without flue offset or smoke deflector.

Hearth Protection

The hearth and/or floor protection must be a thermally rated non-combustible hearth/floor protector meeting or exceeding a thermal rating of k=.84 or equivalent with a listed thickness of 3/4" (19mm) minimum in USA and Canada. The covering must extend 24” (610mm) in front of the heater and 8” (200mm) to either side (measured from door opening in the USA and measured from the side of the unit in Canada).

Maximum Mantel Depth = 9” (229 mm)