Important to Installer

Please Read The Following Instructions Carefully Before Starting To Install The Dryer. These Instructions Should Be Retained For Future Reference.

REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES SUCH AS DRYERS TO AVOID THE DANGER OF A CHILD SUFFOCATING.

LOCATION CONSIDERATIONS

The dryer should be located to permit adequate room in front for loading the dryer, and sufficient room behind the dryer for the exhaust system.

This dryer is factory-ready for rear exhaust. To exhaust out the bottom or left side, use the accessory exhaust kit (see Accessories). Instructions are included with the kit.

It is important to make sure the room has adequate make-up air. The area where the dryer is located must not obstruct the flow of combustion or ventilating air.

On gas dryers, adequate clearance as noted on the data plate must be maintained to insure adequate air for combustion and proper operation of the dryer.

THE DRYER MUST NOT BE INSTALLED OR STORED IN AN AREA WHERE IT WILL BE EXPOSED TO WATER AND/OR WEATHER. THE DRYER AREA IS TO BE KEPT CLEAR AND FREE FROM COMBUSTIBLE MATERIALS, GASOLINE AND OTHER FLAMMABLE VAPORS AND LIQUIDS. A DRYER PRODUCES COMBUSTIBLE LINT. THE AREA AROUND THE DRYER SHOULD BE KEPT FREE OF LINT.

ALCOVE OR CLOSET INSTALLATION

!WARNING WARNING – The dryer must

be exhausted to

the outside to reduce the risk of fire when

installed in an alcove or closet.

•An appliance installed in a closet shall have no other fuel- burning appliance installed in the same closet.

•WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED TO THE OUTDOORS. See EXHAUST INFORMATION section.

•Minimum clearances between dryer cabinet and adjacent walls or other surfaces are: 2" front, 0" top, 0" either side and 2-3/8" rear.

•Closet front must have two unobstructed air openings combined total area 72 in2 min., located 3 in min. from top and bottom.

Louvered door with equivalent air opening is acceptable.

MOBILE HOME INSTALLATION

The installation of the dryer in mobile homes must conform to the Manufactured Home

Construction and Safety Standard Title 24 CFR, Part 32-80 {formerly the Federal standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280), 1975} for the United States,) or CSA Standards Z240 (for Canada). When installing a dryer in a mobile home, provisions for anchoring the dryer to the floor must be made. An anchor bracket kit is available with instructions (see Accessories). Locate in an area that has adequate make up air. A minimum of 72 in2 (183 cm2 ) of unobstructed opening is required. All mobile home installations must be exhausted to the outside with the exhaust duct termination securely fastened to the mobile home structure, using materials that will not support combustion. The exhaust duct may not terminate beneath the mobile home. See the section on exhausting for more information.

DC68-02033B-03 specifications

The Maytag DC68-02033B-03 is a highly regarded appliance designed to enhance the efficiency and convenience of laundry tasks in modern homes. This product is designed with a focus on durability, performance, and user-friendliness.

One of the standout features of the Maytag DC68-02033B-03 is its robust construction. Built with high-quality materials, this unit promises longevity and reliability, making it a valuable investment for any household. Its stainless steel drum resists odors and chips, ensuring that it remains in excellent condition even after years of use. Additionally, the appliance boasts a powerful motor that enhances its performance across various wash cycles.

The DC68-02033B-03 is equipped with advanced technologies that optimize laundry processes. The Precision Wash technology features sensors that automatically adjust water levels and wash times based on the load size and fabric type, providing an efficient wash every time. This not only saves water but also enhances cleaning effectiveness.

Another significant innovation in this model is its Optimal Dispensers system, which releases the right amount of detergent at the right time. This feature helps to maximize cleaning power while preventing excess suds that can potentially damage the unit. The machine also includes a variety of wash cycles, enabling users to select from options designed for different fabric care needs, making it versatile for all laundry types.

User convenience is evident in the Maytag DC68-02033B-03’s intuitive controls and large capacity. The easy-to-read display and straightforward buttons ensure that users can easily navigate through settings, while the spacious drum allows for larger loads, reducing the number of washes required.

Energy efficiency is another characteristic of the Maytag DC68-02033B-03. It is designed to comply with ENERGY STAR standards, meaning it uses less energy than traditional models. This not only benefits the environment but also lowers utility bills, making it a cost-effective choice for families.

In conclusion, the Maytag DC68-02033B-03 is a remarkable appliance that combines durability, advanced technology, and user-friendly features. Its focus on efficiency and care for fabrics makes it an excellent option for those seeking a reliable washing solution that meets the demands of today’s busy lifestyles. Whether for large families or individual users, this Maytag model stands out in the competitive laundry appliance market.

Maytag DC68-02033B-03 Important to Installer, Alcove or Closet Installation

Models: DC68-02033B-03