Maytag Dishwasher Installation Instructions, E L E C T R I C A L R E Q U I R E M E N T S

Installation Instructions

B u i l t - I n D i s h w a s h e r

Leave Installation Instructions and User’s Guide with Owner

ALL ELECTRICAL WIRING, GROUNDING AND PLUMBING

SHOULD BE DONE IN ACCORDANCE WITH NATIONAL

AND LOCAL CODES BY QUALIFIED INDIVIDUALS.

E L E C T R I C A L R E Q U I R E M E N T S

This dishwasher is designed for operation on an individual 120 VAC, 60 Hz grounded electrical circuit. Use required fuse (15 amp) or comparable circuit breaker. Two wire with ground service to the dishwasher is recommended for connection at the terminal box for grounding.

WARNING

To prevent accidental contact with electrical connections, built-in dishwasher models must not be connected to a power source unless the dishwasher is completely enclosed, with front panels in place. If the back or either side of the dishwasher is exposed, a panel must be used to complete this enclosure. Failure to follow this warning could result in death or serious injury.

G R O U N D I N G I N S T R U C T I O N S

This appliance must be connected to a grounded metal, permanent wiring system; or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding

terminal or lead on the appliance.

WARNING

To prevent the possibility of electrical shock, this dishwasher, as other electrical appliances, must be adequately grounded. It is the responsibility of the installer at the point of installation, taking into consideration local conditions and requirements. Failure to follow this warning could result in death or serious injury.

P L U M B I N G R E Q U I R E M E N T S

CHECK LOCAL PLUMBING CODES FOR APPROVED PLUMBING PROCEDURES AND ACCESSORIES. ALL PLUMBING SHOULD BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL CODES.

WARNING

Disconnect electrical power to dishwasher before you start! Failure to follow this warning could result in death or serious injury.