Attach the hose
Unplug deep cleaner from electrical source.
✓ Place handle in upright position. |
✓ The hose and tool caddy can be removed from the |
cleaner if you desire. |
✓ Remove hose from tool caddy. |
✓ Open hose door (A) on back of deep cleaner (Fig. 13). |
13
14
A
A C
✓ Align hose connector with hose and solution ports (C) |
(Fig. 14). |
✓ Push hose into port and lock in place. |
✓ To remove hose: Squeeze latches (D) on top and bottom |
of hose. Remove hose from port (Fig. 15). |
✓ Close hose door (A) tightly (inset). |
Select tool
16 | 17 |
B
15
D
A
SpinScrub™ hand tool | Stair/Upholstery nozzle | ||
• | Rotating brushes | • | |
• | Use on carpet to clean | • | Use on upholstery |
| spots, small areas or |
| 18 |
| stairs |
|
|
Attach tool
Unplug deep cleaner from electrical source.
✓ Slide tool onto hose. Snap tool over tab (E) on hose (Fig 18).
E
✓To remove tool: Push forward and up on latch (F) (Fig. 19). Slide tool off hose.
19
F
Continued ➜ | 7 |