Maytag F6212901 Routine care for your Deep Cleaner, Clean the nozzle, Clean the brushes, 44 D

41

A

42

B

43

44D

F E

C

Routine care for your Deep Cleaner

Clean the nozzle

Unplug deep cleaner from electrical source.

➤Remove solution and recovery tanks to prevent possible leaks.

➤Lift up on top of nozzle (A) and slide off cleaner (Fig. 41).

➤Wipe debris off nozzle and front of cleaner with a damp cloth.

➤Tilt cleaner back, raising front of cleaner off floor. Slide nozzle

(B) up from bottom of cleaner (Fig. 42).

➤Press on upper portion of nozzle to snap in place.

Clean the brushes

Unplug deep cleaner from electrical source.

➤Remove solution and recovery tanks to prevent possible leaks.

➤Tilt cleaner back so handle rests on the floor.

➤Pull brush assembly firmly to remove (Fig. 43).

➤Rinse brushes under running water.

➤Align posts (C) on brush assembly with slots (D) in cleaner (Fig. 44).

➤Turn brushes slightly to align square post (E) with square hole

(F) in cleaner (Fig. 44).

➤Press brush assembly firmly and snap in place.

	Clean the brush filter
	Unplug deep cleaner from electrical source.
	➤ Remove solution and recovery tanks to prevent possible
45	leaks.
	➤ Tilt cleaner back so handle rests on the floor.
	G
	➤ Squeeze filter frame (G) and pull it out until it stops (Fig. 45).
	➤ Wipe debris off filter.
12	➤ Slide filter back into place.