Increased air circulation (open doors, turn on fans, etc.) will help upholstery dry thoroughly.
12
When water has reached the full line in the recovery tank, the cleaner will NOT pick up any more dirty solution.
Allow upholstery to dry. Avoid using upholstery until it is dry.
9 Let go of trigger and pull tool over same area to pick up dirty solution with- out putting down more solution. Continue using dry strokes until you see only a little solution coming up through the tool.
Do not make the upholstery too wet! Use no more than two strokes while
10 releasing solution. Always follow with dry strokes - the more the better.
Listen carefully! When the motor sound changes (rises in pitch), the recovery
11 tank needs to be emptied.
Place handle in full upright position. Turn cleaner ON.
6
7
8 Squeeze and hold trigger (A) to release cleaning solution. Gently press tool into fabric and slowly pull the tool over the fabric (Fig. 40).
Attach hose and tool as described in Figs. 13-19 (Fig. 39).
Spray spot or area with Spot and Stain Spray. Then proceed with the next cleaning steps.
5 Fill solution tank with hot tap water and proper amount of MAYTAG deter- gent (see page 5)(Fig. 38).
Use only MAYTAG brand detergents in your deep cleaner. Other brands may damage the deep cleaner.
4
Test detergent for colorfastness on a hidden area of upholstery.
Wet a white cloth or paper towel with some detergent. Gently rub onto a hidden area of upholstery. Wait ten minutes. Blot with white cloth or paper towel and check for color transfer.
Pretreat spots and stains with MAYTAG Spot and Stain Spray (Fig. 37).
2
3
Do not use the deep cleaner on upholstery marked ‘Dry Clean Only’. If you are unsure, please refer to the original manufacturer.
Vacuum upholstery thoroughly with your vacuum cleaner’s attachments.
Cleaning upholstery
Check fabric cleaning code (Fig. 36). The codes indicate whether it is alright
1 to use your deep cleaner to clean the upholstery.
36
37
38
39
40
A
Continued ➜ | 11 |
