![](/images/new-backgrounds/1050360/5036045x1.webp)
The headlight
What to buy
This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part No.
How to replace
Disconnect ckaner from eiectri- cai outlet and detach hose from cieaner.
1.Remove nozzle control knob on front of hood by grasping knob and pulling up.
2.Place handle in operating position and turn cleaner over. Insert end of flat screwdriver into one of the four slots beside an arrow on bottom of cleaner.
3.Pry outward to release latch. Repeat to release latches at the remaining three arrows.
4.Turn cleaner over and lift off hood.
20