![](/images/new-backgrounds/1050360/5036047x1.webp)
5.Remove bulb by pulling straight out of socket; push new bulb into socket until it locks in place.
6.Place hood on cleaner body and press firmly to snap all four latches. Pull up on hood slightly to make sure all four latches are secured. Push nozzle control knob back onto front of cleaner.
The belt
The belt on your HOOVER cleaner causes the agitator to rotate and is impor- tant for the effective operation of the cleaner. The belt is located under the bottom plate of the cleaner and should be checked from time to time to be sure it is in good condition.
When to replace
To check belt, remove bottom plate as shown on the following page under “How to replace.” Replace belt if it is stretched, cut or broken.
What to buy
One extra belt has been provided with your cleaner.
To assure effective operation, use only genuine HOOVER belts with your cleaner. When purchasing a new belt, ask for Hoover part No. 38528427.
21