With cord hooks to back, place assembled handle onto handle base of cleaner body. (Fig. 17)
Rock handle side to side while pushing down firmly. Extra pushing effort may be required.
Press the handle release lever to move handle to the operating or middle position.
Push bolt into hole on lower front of handle. (Fig. 18)
If bolt will not go through hole essily the bracket Is not locked and/or handle is not pushed down completely.
Place nut in recessed area at back of handle. Hold nut in place while tightening bolt securely with a screw driver. (Fig. 19)
Only one nut is needed on this ,model. The extra nut is not required but has been provided for your convenience.
