![](/images/new-backgrounds/1050360/5036041x1.webp)
Clearing obstructions
To check for obstructions, first turn cleaner off and disconnect from electrical outlet; then disconnsct hose from cleaner. Open hose door and carefully remove any visible obstruction. If no obstruction is found, check hose and tools. Remove obstruction. To continue using tools, reattach hose to cleaner. If no obstruction is found and a problem persists, contact your Hoover Factory Service Center or Authorized Warranty Service Dealer (Depot).
How to clean tools
To clean the hose, wipe off dirt with a cloth dampened in a liquid
detergent. Rinse with a damp cloth. Cleaning tools may be washed in warm water with a detergent. Rinse and air dry before using.
How to attach tool cover
The tool cover is designed with a
Maintenance
The following sections are concerned with proper maintenance of the cleaner. Familiarize yourself with these home maintenance tasks and keep this owner’s manual in a convenient place where you can refer to it when needed. Proper use and care of your cleaner will ensure continued cleaning effectiveness.
The bag
When to replace
Check bag from time to time. It is recommended that you change the bag when dirt reaches the dotted line. If more dirt than this accumulates, your cleaner may not operate effectively.
CAUTION: Very fine materials, such as face powder, cornstarch, fireplace ashes or fireplace soot, may seai the paper bag and may cause it to burst even though it is only partially full of dirt. When cleaner is used to remove
material of this nature, change bag often. | 18 |