Maytag LAT9804, LAT9824, LAT8904, LAT6914 operating instructions Washing, Select Cycle and Time

Models: LAT9804

1 11
Download 11 pages 29.44 Kb
Page 6
Image 6
Select Cycle and Time

_jaccordingto moc_q.

ENERGY SAVER HOT/COLD - When HOT/

COLD and Energy Saver "ON" are selected, the wash water will be a blend of hot and warm water. Rinse

water will be cold. Use this setting for moderately

soiled whites and colorfast items.

WARM/WARM - Wash water will be a mixture of water coming from the hot and cold water faucets. Rinse water

will be the same, except when the permanent press cycle is selected; then it will automatically be cold. Use

this setting for delicates and for eolored items when a warm rinse following the wash is pre-

ferred,

ENERGY SAVER WARM/WARM - When WARM/

WARM and Energy Saver "ON" are selected, the wash and rinse water will be a blend of warm and cold water.

However, when the permanent press cycle is selected, the rinse water will automatically be cold. Use this

setting for eolored and permanent press items _rdth light soil.

WARM/COLD - Wash water will be a mixture of water coming from the hot and cold water faucets,

Rinse water will be cold. Use this for items with moderate soft level and colored items.

ENERGY SAVER WARM/COLD - When WARM/

COLD and Energy" Saver "ON" are selected, the wash water will be a blend of warm and cold water. Rinse

water will be cold. Use this for lightly soiled col-

ored items,

COLD/COLD - Wash and rinse water will be the

temperature of the water coming from the cold water

faucet. Use this setting to minimize fading of

brightly colored items and shrinkage of washable woolens.

NOTE: Water below 65°F is too cold to dissolve and I

activate granular laundry" detergents.

I

 

Select Cycle and Time

Push in the cycle control knob and turn clockwise to the proper cycle and wash time.

Washing:

The HEAVY eyele is designed to wash very soiled loads, the NORMAL cycle is for average soiled loads and the LIGHT cycle should be selected for

slightly soiled loads.

For REGULAR FABRIC loads, turn the control knob

to 12 minutes for a HEAVY cycle; to 8 minutes for a NORMAL cycle; and to 5 minutes for a LIGHT cycle.

The SUPERWASH cycle (not on all models) provides additional wash time for regular fabric loads. It will add approximately 6-8 minutes of agitation to the cycle. To select, turn the control knob to SUPERWASH.

For DELICATES, washable woolens, or loosely woven items, turn the control knob to "delicates" on REGU-

LAR FABRICS and select GENTLE/SLOW speed.

For PERMANENT PRESS loads, turn the control knob to 10 minutes for a HEAVY cyele; to 7 minutes for a NORMAL cycle; and to 5 minutes for a LIGHT cycle.

For KNITS, such as cotton knit Polo shirts, turn the control knob to "knits" on PERMANENT PRESS and

select REGULAR￿FAST speed. If the knit items are loosely woven, select GENTLE/SLOW speed.

. , _/20Ye

PAGE 5

Page 6
Image 6
Maytag LAT9804, LAT9824, LAT8904, LAT6914 operating instructions Washing, Select Cycle and Time