Maytag LAT9824, LAT8904, LAT9804, LAT6914 operating instructions Maintaining The, Storing The Washer

Models: LAT9804

1 11
Download 11 pages 29.44 Kb
Page 8
Image 8
MAINTAINING THE

MAINTAINING THE

WASHER

Turn off the water thueets after finishing the day's washing. This will shut off the water supply to the

washer and prex ent tile unlikely possibility of dam- age from escaping water,

Clean the control panel with a soft damp cloth and glass cleaner. Do not use any abrasive powders or

cleaning pads.

Clean the cabinet with soap and water followed with an appliance wax, if desired.

The SELF-CLEAN LINT FILTER is located under the agitator on tbe bottom of the washtub.

The lint filter in this washer cleans itself. During

the wash and rinse portion of the cycle, lint is col_ leeted on the filter. The filter is then flushed auto-

matically during the spin and drain.

STORING THE WASHER

W_shers can be damaged if water is not removed from

hoses and internal colnpnnents before storage. Prepare the washer for storage as follows:

*Select NORMAL cycle on Regular Fabrics and add one cup of bleach or white vinegar to a fnI1 load of water without clothes. Run the washer through a complete cycle.

Tnrn the water faucets off and disconnect the inlet hoses.

Advance the (Tcle control knob to the spin of Regular Fabrics and lower drain hose to drain any

water that may be in the drain bose.

Disconnect the washer from the electrical supply

and leave the washer lid open to let air circulate inside the tub.

PAGE 7

Page 8
Image 8
Maytag LAT9824, LAT8904, LAT9804, LAT6914 operating instructions Maintaining The, Storing The Washer